Sorensen DC Power Supplies - Electronic Test Equipment


SORENSEN DC POWER SUPPLIES
www.sorensendcpowersupplies.com

SORENSEN CATALOGUE

Sorensen DC Power Supplies
Sorensen DC Power Supplies
Sorensen DC Power Supplies
Sorensen DC Power Supplies
Sorensen DC Power Supplies
Sorensen DC Power Supplies
Sorensen DC Power Supplies
Sorensen DC Power Supplies
Sorensen DC Power Supplies

BENCH PRODUCTS CATALOGUE

Sorensen DC Power Supplies
Sorensen DC Power Supplies
Sorensen DC Power Supplies
Sorensen DC Power Supplies
Signal Test- new and used test equipment
www.SignalTestInc.com
Related Links
 
Boonton RF Peak Power Meters
Noise Com Programmable Noise Generators
Pulse Generators
SWR Antenna Tuner Meter Analyzer
 
Sorensen DLM Series 3 kW and 4 kW : Overview

Programmable DC Power Supplys

The Sorensen DLM 3 kW and 4 kW Series programmable DC power supplies are designed to provide highly stable, continuously variable output voltage and current for a broad range of applications in a compact 2U ( 3½” high) chassis.

The 4 kW power rating is new to the Sorensen Family of power supplies. Both the 3 kW and
4 kW models have output voltages from 0-5 VDC to 0-600 VDC and a current range from 0-5A to 0-450A. The output RMS noise is as low as 10 mV. The output will recover to 1% of its steady-state voltage within 1 ms for a step load change of 100% to 70% or 70% to 100%. The front panel layout makes the series extremely easy to use. Control switches include: power on, enable/ standby and local/remote.

Displays and indicators show programmed set points and operational control status. The programmed voltage, current and overvoltage set points are displayed with two large 3½ digit LED displays. Operational Status LEDs indicate power on, shutdown, overtemperature, overvoltage, constant current and voltage mode status. Control Status LEDs indicate front panel lockout, remote control and standby status. IEEE-488.2 control LEDs indicate error, service request and remote address status.

The 3 kW Models will accept 200*/230 VAC single phase and 200*/208 VAC three phase input power.

The 4 kW Models will accept 200*/208 VAC, three phase or optional 400 or
480 VAC three phase input power.

*Operating temperature below 40°C



Signal Test Inc
1529 Santiago Ridge Way
San Diego, CA 92154
Tel. 619 575 1577 USA
www.SignalTestInc.com
email: sales@SignalTestInc.com

Thank you for visiting Sorensen DC Power Supplies


Presented by: San Diego Online DESIGNED BY  san diego restaurants and San Diego Online.© Copyrights 2009,  by San Diego Online.
If you are interested in listing your business, web site design, or you have any comments, Please send an email to info@sdro.com